Bambu Lab X2D
The Bambu Lab X2D is an enclosed printer with a 256 × 256 × 260 mm build volume (17.0 litres), a 300 °C nozzle and a 120 °C bed, listed at $649 in the US.
- 17.0 Lbuild volume
- 300 °Cmax nozzle
- 120 °Cmax bed
- $649US list price
Specifications
| Spec | Bambu Lab X2D |
|---|---|
| Build volume (mm) | 256 × 256 × 260 |
| Build volume (litres) | 17.0 |
| Max nozzle temp | 300 °C |
| Max bed temp | 120 °C |
| Claimed max speed | not stated |
| Claimed max acceleration | not stated |
| Enclosed | Yes |
| Heated chamber | Yes |
| Multi-material | Dual-nozzle (main + auxiliary extruder); supports AMS / AMS 2 Pro Combo |
| Motion system | not stated |
| Extruder | not stated |
| Nozzle sizes (mm) | 0.2, 0.4, 0.6, 0.8 |
| Stock nozzle | 0.4 mm |
| Firmware | not stated |
| Connectivity | wifi 2.4/5ghz, bambu-bus |
| Weight | 16.25 kg |
| Rated power (supply maximum, not running draw) | not stated |
| US list price | $649 |
What it can print
Each material's data sheet temperatures are set against this printer's published limits: a 300 °C nozzle, a 120 °C bed and an enclosed frame. On those numbers it covers PLA, PLA+ / tough PLA, PETG, ABS, ASA, TPU 95A, PA6 (nylon), PA-CF, PC, PVA, HIPS.
| Material | Verdict | Why | Nozzle range | Bed range |
|---|---|---|---|---|
| PLA | Yes | Nozzle needs up to 230 °C, this printer reaches 300 °C. | 190 to 230 °C | 25 to 60 °C |
| PLA+ / tough PLA | Yes | Nozzle needs up to 230 °C, this printer reaches 300 °C. | 190 to 230 °C | 30 to 60 °C |
| PETG | Yes | Nozzle needs up to 260 °C, this printer reaches 300 °C. | 230 to 260 °C | 65 to 90 °C |
| ABS | Yes | Nozzle needs up to 270 °C, this printer reaches 300 °C. | 210 to 270 °C | 80 to 100 °C |
| ASA | Yes | Nozzle needs up to 270 °C, this printer reaches 300 °C. | 240 to 270 °C | 70 to 115 °C |
| TPU 95A | Yes | Nozzle needs up to 240 °C, this printer reaches 300 °C. | 210 to 240 °C | 30 to 50 °C |
| PA6 (nylon) | Yes | Nozzle needs up to 290 °C, this printer reaches 300 °C. | 245 to 290 °C | 50 to 90 °C |
| PA-CF | Yes | Nozzle needs up to 300 °C, this printer reaches 300 °C. | 260 to 300 °C | 25 to 100 °C |
| PC | Yes | Nozzle needs up to 280 °C, this printer reaches 300 °C. | 250 to 280 °C | 90 to 110 °C |
| PVA | Yes | Nozzle needs up to 250 °C, this printer reaches 300 °C. | 180 to 250 °C | 25 to 60 °C |
| HIPS | Yes | Nozzle needs up to 270 °C, this printer reaches 300 °C. | 230 to 270 °C | 90 to 115 °C |
Will your part fit
Enter the size of your part. The check allows turning the part onto any side, but not tilting it diagonally.
Closest alternatives
The three printers nearest to the Bambu Lab X2D's $649 US list price.
- Bambu Lab X2D256 × 256 × 260 mm
- Original Prusa MK4S250 × 210 × 220 mm
Original Prusa MK4S
- Build volume
- 250 × 210 × 220 mm
- Against this printer
- 5.4 litres less build volume
- US list price
- $679, $30 more
- Bambu Lab X2D256 × 256 × 260 mm
- Creality K1C220 × 220 × 250 mm
Creality K1C
- Build volume
- 220 × 220 × 250 mm
- Against this printer
- 4.9 litres less build volume
- US list price
- $559, $90 less
- Bambu Lab X2D256 × 256 × 260 mm
- Bambu Lab P2S256 × 256 × 256 mm
Bambu Lab P2S
- Build volume
- 256 × 256 × 256 mm
- Against this printer
- 0.2 litres less build volume
- US list price
- $549, $100 less
In each drawing the teal box is the Bambu Lab X2D and the orange box is the alternative, at the same scale.
Compare with another printer
Put the Bambu Lab X2D next to any of the other 24 printers in the comparison tool. Rows where the specs differ are shaded, and the build volumes are drawn over each other to scale.