LayerTune
Filament

PETG print settings

PETG prints with a nozzle at 205 to 270 °C and a bed at 60 to 90 °C. No enclosure is needed.

A 3D printer print head above two flat orange parts with slots and holes, lit in orange and teal.
Photo: Jakub Żerdzicki / Unsplash

Quick settings

Nozzle205 to 270 °C
Bed60 to 90 °C
  • Drying temperature50 to 65 °C
  • Drying time5 to 8 h
  • EnclosureNot needed
  • Density1.25 to 1.28 g/cm³
  • Heat deflection temperature62 to 69 °C

Test load: reported at both 1.8 MPa and 0.45 MPa (ISO 75); Bambu: 62/69, Prusament: 68/68, eSUN: 64 (load not stated)

By brand

BrandProductNozzleBedDryingMax speed statedSource
Bambu LabPETG Basic230 to 260 °C65 to 75 °C65 °C / 8 h200 mm/sstore.bblcdn.com
Bambu LabPETG HF230 to 260 °C65 to 75 °C65 °C / 8 h300 mm/sstore.bblcdn.com
eSUNPETG240 to 260 °C75 to 90 °C60 °C / 8 h150 mm/sesun3d.com
eSUNPETG-Basic240 to 260 °C75 to 90 °C60 °C / 8 h250 mm/sesun3d.com
OvertureHigh Speed PETG230 to 260 °C65 to 70 °C60 °C / 5 h300 mm/soverture3d.com
PrusamentPETG240 to 260 °C70 to 90 °Cnot stated200 mm/sprusament.com
SunluHigh Speed Matte PETG205 to 270 °C60 to 80 °C50 °C200 mm/sstore.sunlu.com
SunluPETG240 to 260 °C60 to 70 °Cnot stated300 mm/scdn.shopify.com
8 PETG filaments in the database. Missing one? Email contact@layertune.com with a link to the maker's data sheet.

Where brands disagree

Makers do not agree on PETG. Start from your own brand's figure, not the generic range.

  • NozzleSunlu 205°C to Sunlu 270°C (65°C spread)
  • BedSunlu 60°C to eSUN 90°C (30°C spread)
  • Drying temperatureSunlu 50°C to Bambu Lab 65°C (15°C spread)

Printers that can run it

25 of 25 printers reach PETG's nozzle and bed temperatures.

Bambu Lab A1 mini, Bambu Lab A1, Bambu Lab P1S, Bambu Lab P2S, Bambu Lab X2D, Bambu Lab H2D, Original Prusa MK4S, Prusa CORE One+ (Gen 2), Original Prusa MINI+, Prusa XL+ Single-Tool, Creality Ender-3 V3 SE, Creality Ender-3 V3 KE, Creality Ender-3 V3, Creality K1C, Creality K2 Plus (CFS Combo), Elegoo Neptune 4 Pro, Elegoo Neptune 4 Max, Elegoo Centauri Carbon 2 Combo, Anycubic Kobra 3, Anycubic Kobra S1, Flashforge Adventurer 5M, Flashforge AD5X, Sovol SV08, Qidi Plus5, Qidi Q2

Cost per metre

At 1.75 mm diameter and a density of 1.25 to 1.28 g/cm³, PETG weighs 3.01 to 3.08 g per metre.

Use the filament length and weight calculator with your own spool price for a cost per metre.

Fumes and ventilation: follow the guidance in your filament maker's safety data sheet.

Is a filament missing, or has a maker changed its settings? Email contact@layertune.com with a link to the data sheet and we will update this page.